SP-40HI
Source: Spar Mixers
Standard equipment includes a 42.3Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip
Motor: 1.5 h.p. (1.2kW), grease packed ball bearing, air-cooled, 208/60/1, 208/60/3, 220/60/1, 240/60/3 (50Hz available)
Controls: Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug: Both single phase and three phase are hard wired
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds: (Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320
Bowls and Agitators: Standard equipment includes a 42.3Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
N.W. 550lbs (250kgs)
G.W. 638lbs (290kgs)
Carton Size: Depth 29in.(73cm) Width 25in.(63cm) Height 51in.(130cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.
Controls: Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug: Both single phase and three phase are hard wired
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.
Speeds: (Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320
Bowls and Agitators: Standard equipment includes a 42.3Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
N.W. 550lbs (250kgs)
G.W. 638lbs (290kgs)
Carton Size: Depth 29in.(73cm) Width 25in.(63cm) Height 51in.(130cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.
Spar Mixers, 2210 Queen Street, East, Unit 5, Toronto, ON M4E 1E7. Tel: 416-691-2381; Fax: 416-691-4663.
This website uses cookies to ensure you get the best experience on our website. Learn more