Product/Service

Flex-Coil Water Connectors

Source: AVTEC Industries, Inc.
Flex-Coil Water Connectors are ideal for making final water connections for counter or floor mounted equipment. They are manufactured from NSF 14 grade polyurethane and FDA approved dye. All fittings and quick disconnects are of tough , durable thermoplastic. Both the tubing and the fittings are NSF certified with a maximum operating pressure and temperature of 125 psig & 165°F. The coffee maker kit includes several common fittings which will mate to most field connections. These fittings are interchangable on the tubing without the use of tools! The illustration to the left shows the Flex-Coil connected to the top of the Avtec UDS for the above counter items, and to the bottom of the UDS for under counter items.
Design Features

  • Exclusive "Quick-Change" fittings. No commpression fittings needed.

  • Mix and Match basic hose with any style 1/4" or 3/8 fitting..

  • NSF certified hose and fittings.

  • All fittings (both ends) have full 360° swivel feature.

  • One kit (with 3 fittings) will fit most any application.

  • Quick Disconnect has "push to connect" feature with auto locking ring

Flex-Coil Water Connectors are ideal for making final water connections for counter or floor mounted equipment. They are manufactured from NSF 14 grade polyurethane and FDA approved dye. All fittings and quick disconnects are of tough , durable thermoplastic. Both the tubing and the fittings are NSF certified with a maximum operating pressure and temperature of 125 psig & 165°F.

The coffee maker kit includes several common fittings which will mate to most field connections. These fittings are interchangable on the tubing without the use of tools!

The illustration to the left shows the Flex-Coil connected to the top of the Avtec UDS for the above counter items, and to the bottom of the UDS for under counter items.

AVTEC Industries, Inc., 120 Kendall Point Dr., Oswego, IL 60543-8898. Tel: 630-851-4800; Fax: 630-851-5777.